MdsHeat Weekly Programming Thermostat

Introduction
MdsHeat-Weekly-Programming-ThermostatThe MdsHeat Weekly Programming Thermostat is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.
The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected set point.
    

Application
For the control of direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings... 


Features  

7 Days programmable function for energy-saving operation 


On/off control output for heating device 


Symbol indicator when heating is on 


Temperature limitation function for protecting the floor 


Current room temperature displaying when the thermostat is switched-off 


“Key-lock” function for protecting the settled parameters (especially suitable for Public Places) 

  

  

Technical data 

Voltage: AC230V 50 ~ 60 Hz 

Power consumption: 2W 

Setting range: 590℃ (can adjust to 35 - 90℃)  

External Limitation range: 560 (factory setting: 35) 

Switching differential: 0.5 - 10 (adjustable, factor setting ±1

Ambient temperature: 550 

Protective housing: IP20 

Housing material: anti-flammable PC 

Floor sensor: rubber-thermoplastic NTC sensor, cable length is 3m

 

Copyright 2011 MdsHeat Weekly Programming Thermostat. MDS Heating Ind.(1991)Ltd © All rights Reserved
Joomla Templates by Wordpress themes free